Apple Watch size: how do you know which one you wear? The simplest way is to turn the watch over: the case size, in millimetres, is engraved on the back. If the engraving is hard to read, the Apple Watch app on your iPhone gives you the model number, which you simply compare with Apple's official table. You need this figure to buy a band or a case that fits.
In short
- The case size (40, 41, 42, 44, 45, 46 or 49 mm depending on the model) is engraved on the back of the Apple Watch.
- In the Apple Watch app on the iPhone: My Watch, General, About, then the Model Number field.
- The same figure can refer to two different cases: 42 mm on a Series 3 is not 42 mm on a Series 10.
Once you know the size, you can choose your carbon Apple Watch case without picking the wrong model.
Where is your Apple Watch size shown?
Apple explains it on its support page Identify your Apple Watch: to find out the case size, check the engraving on the back of the watch. Take the watch off, hold it under good light and tilt it slightly: the text is thin and easier to read in the reflection. You will find the size, followed by details about the case material.
Also think of the original box or the invoice, which usually state the size in the product name. These documents are handy if the watch is on the wrist of the person you want to surprise with a gift.
How do you find the model from your iPhone?
If the engraving is worn, the Apple Watch app on the paired iPhone gives you the model number:
- Open the Apple Watch app on your iPhone.
- Tap the My Watch tab.
- Tap General, then About.
- Tap the Model Number field: the reference starting with M is replaced by an identifier starting with A.
This A identifier matches a single model and a single size in Apple's table. Look it up on the identification page mentioned above to read the exact size. The same About menu also shows the serial number, as explained on the page Find the serial number of your Apple Watch.
The process is similar to a phone's: we have detailed it in our guides to find out which iPhone you have and to identify your Samsung Galaxy.
Which sizes for which Apple Watch model?
Here are the case sizes listed by Apple for the most common models:
| Model | Case sizes |
|---|---|
| Apple Watch Ultra, Ultra 2, Ultra 3, Ultra 4 | 49 mm |
| Series 10, Series 11, Series 12 | 42 mm or 46 mm |
| Series 7, Series 8, Series 9 | 41 mm or 45 mm |
| Series 4, 5, 6, SE (2nd generation), SE 3 | 40 mm or 44 mm |
| 1st generation, Series 1, 2 and 3 | 38 mm or 42 mm |
Why doesn't 42 mm always mean the same thing?
This is the most common trap. The first Apple Watch models, up to the Series 3, came in 38 and 42 mm: 42 mm was then the large model. Since the Series 10, 42 mm refers to the small model, alongside the 46 mm. They are two different cases.
For a band or a case, always go by the model and size together, never by the size alone. A Series 9 in 45 mm and a Series 10 in 46 mm do not share the same case either: a case designed for one will not fit the other.
Which case should you choose once you know the size?
Fibernium carbon cases are made for the large cases. According to the product pages, they are compatible with the Apple Watch Ultra 1, 2 and 3 (49 mm), the Series 10 and 11 (46 mm) and the Series 7, 8 and 9 (45 mm). The 40, 41, 42 and 44 mm cases are not in the range.
- Apple Watch 45 mm cases: Series 7, 8 and 9
- Apple Watch 46 mm cases: Series 10 and 11
- Apple Watch Ultra cases: Ultra 1, 2 and 3
Each size comes in three finishes: FIBRE in woven carbon fibre, BRUTE in forged carbon with a marbled pattern, and coloured BRUTE. Our guide to carbon Apple Watch cases compares these finishes in detail.
The Fibernium tip: if you have a Series 12 or an Ultra 4, these models are not yet listed in the compatibility stated on our product pages. Check the product page before ordering or write to us: we would rather answer your question than see you return a case.
Frequently asked questions
Does the Apple Watch size match your wrist size?
No. It refers to the watch case. Your wrist size is adjusted with the band, which has its own sizes.
Where can you find the size if the engraving on the back has worn off?
In the Apple Watch app on the iPhone: My Watch, General, About, Model Number field. Then compare the A identifier with Apple's table.
Does a 45 mm case fit a 46 mm Apple Watch?
No. The cases of the Series 7 to 9 and of the Series 10 and 11 are different: each Fibernium case is cut for a single case size.
My watch is 41 mm: is there a Fibernium case?
Not at the moment. Fibernium cases cover 45, 46 and 49 mm cases.